New passenger handle bar

Subject: New passenger handle bar Tue Apr 29, 2008 9:46 pm

I picked up all the needed steel and aluminum tubing, layed it it out and made all the cuts and tomorrow night i hope to have it welded. Then to paint and install. You know i will post pics as things come to pass Cool

Subject: Re: New passenger handle bar Wed Apr 30, 2008 2:20 am

Be sure and keep all your measuremsnets and how you made it so you can make more if needed! You know in case some of us might like to have one!

Subject: Re: New passenger handle bar Wed Apr 30, 2008 7:04 am

rhinomikey wrote:: Be sure and keep all your measuremsnets and how you made it so you can make more if needed! You know in case some of us might like to have one!

As with all my projects I try to keep a complete material list for those that wish. I can tell you that I will be mounting this one to the "leg minders", I dont have the doors on. You can however mount it across the top of the dash if you dont have a windsheild. This will all make sense when I post the pics.

Subject: Re: New passenger handle bar Wed Apr 30, 2008 7:37 am

Sounds interesting!

Subject: Re: New passenger handle bar Wed Apr 30, 2008 11:01 am

hunterworks has a killer one to compare it too. good luck - take pics.

Subject: Re: New passenger handle bar Wed Apr 30, 2008 9:58 pm

the mounting

handle - New passenger handle bar 2970802830103281168S500x500Q85

Subject: Re: New passenger handle bar Wed Apr 30, 2008 10:00 pm

the other side

handle - New passenger handle bar 2710979610103281168S500x500Q85

Subject: Re: New passenger handle bar Wed Apr 30, 2008 10:00 pm

the over all

handle - New passenger handle bar 2097304270103281168S500x500Q85

Subject: Re: New passenger handle bar Wed Apr 30, 2008 10:02 pm

with the handle

handle - New passenger handle bar 2432793000103281168S500x500Q85

Subject: Re: New passenger handle bar Wed Apr 30, 2008 10:05 pm

the other angle

handle - New passenger handle bar 2052382640103281168S500x500Q85

Keep in mind that it still has to go to paint. The handle is all aluminum and will be adjustable in 3 positions as well as removable.

TOTAL COST...........$200.00 with paint and hand grips

Subject: Re: New passenger handle bar Wed Apr 30, 2008 10:07 pm

nice work

Subject: Re: New passenger handle bar Wed Apr 30, 2008 10:11 pm

Big-R wrote:: nice work

Thanks.

Subject: Re: New passenger handle bar Wed Apr 30, 2008 10:16 pm

rcmass wrote:: hunterworks has a killer one to compare it too. good luck - take pics.

I just looked at the hunter works brand and I personally have a few design issues with it
#1. Your head could slam into it.
#2. If removed you still have a steel stub looking you in the face.
#3. Its $100 more than mine.

Im not knocking their product in any way, just pointing out why I built mine the way it is.

THANKS for the info because I did not know that i could buy one. Plus it gave me a comparrison.

Subject: Re: New passenger handle bar Wed Apr 30, 2008 10:17 pm

nice work...how does the cross bar affect YOUR leg room?

Subject: Re: New passenger handle bar Thu May 01, 2008 6:59 am

shawnley1222 wrote:: nice work...how does the cross bar affect YOUR leg room?

Not at all. You would have to 6' 6" tall to be bothered.

Subject: Re: New passenger handle bar Thu May 01, 2008 9:56 am

looks good - havent seen one mounted that low before.

what size tubing and clamps did you use?

Subject: Re: New passenger handle bar Thu May 01, 2008 4:37 pm

cool mod.

Subject: Re: New passenger handle bar Thu May 01, 2008 7:04 pm

Dreth wrote:

shawnley1222 wrote:: nice work...how does the cross bar affect YOUR leg room?

Not at all. You would have to 6' 6" tall to be bothered.

Well im 6'5" 220lbs so i guess bad for me

Subject: Re: New passenger handle bar Thu May 01, 2008 8:29 pm

If you dont have the leg minders it wont work. nothing to bolt to with the doors.

Primed

handle - New passenger handle bar 2868869110103281168S500x500Q85

Subject: Re: New passenger handle bar Thu May 01, 2008 8:30 pm

Guest

O.k heres mine. 45.00 I've got pics of the whole materials/mounting task.......... rebel

handle - New passenger handle bar 2gsesrc

handle - New passenger handle bar 29di9ep

Subject: Re: New passenger handle bar Fri May 02, 2008 2:08 am

Pate you been reading my mind.....thats a razor scooter hand bar good pics ill be adding one to my ride.

Subject: Re: New passenger handle bar Fri May 02, 2008 3:00 am

Pate, thats a Pogo stick, isn't it? lol!

Guest

that handle has got to be mounted to the plasic only scratch

Subject: Re: New passenger handle bar Fri May 02, 2008 6:43 am

rhinomcb wrote:: that handle has got to be mounted to the plasic only

Yea, but I would say he has a large backing plate on each side.