water problems

I have 06 660 rhino when get into water above tires the motor want to bogg down an tires stop turning could this be the fan on side of motor??

Remove the fan and try it. It will make it want to lay-down some.

what bout the small hose that runs to it ? an lay down ? an will run hot with fan off?

The fan cools the header and rubber exhaust-hangers. Remove the plastic housing, plastic hose and fan itself. I removed mine, so have others will no ill effects.

thanks any other thing i should do to it to get more fun out it an do you where get 2 piece w/s at cheap price

bright96 wrote:

thanks any other thing i should do to it to get more fun out it an do you where get 2 piece w/s at cheap price

Wind shield?

An after market CDI either increases or eliminates, cant remember which, the rev limiter. Should gain around 7-10 MPH on top end. It also helps with reverse limiter.

yes windshield an what brand cdi i know they offer different brands an rhino is just ride an drink utv an hunt a lil but i have 400 eiger built motor 30 over with piston kit an head work lifted 3 in 29.5 swamplites but im looking for some 29.5 outlaw skinny if anyone got good deal on any

The Dyna-Tek CDI for a carbed 660 is fine.

Thanks for the help I removed the fan I just dont see how that be bogging down my motor any other ideas on what could be

bright96 wrote:

Thanks for the help I removed the fan I just dont see how that be bogging down my motor any other ideas on what could be

When that fan got underwater, it definitely bogs down the motor.

Thanks Everyone

This is what I had on my 07. No problems with it over 5000+ miles.

http://www.blackrhinoperformance.com/products/brp-performance-cdi-rhino-660__per450011-r6.aspx

i took the fan off on my 660.

pm vwhotrodrhino he will let you know how to build a bad a$$ rhino and hook you up with all the parts.