ohsresq
SSXSRider Member
Number of posts : 1753
Registration date : 2010-10-25
Age : 50
Location : Dayton,Ohio
 | | Subject: Radio problem Sun Jan 19, 2014 3:29 pm | |
| I have a Kenwood mobile radio. I last used it in November at Pickett. It was working a couple weeks ago. But today when I went to turn it on nothing. I have checked all the connections and fuses. Does anyone know if these radios have an internal fuse that I could open it up and check?
| |
|
hobbz
Number of posts : 190
Registration date : 2011-11-11
Age : 42
Location : Flatwoods, KY
| | Subject: Re: Radio problem Sun Jan 19, 2014 4:58 pm | |
| They usually have a very small fuse soldered to the board right by where the main power wires are soldered to the board. If will probably look like a surface mount resistor, and about the size of a pinhead... | |
|
ohsresq
SSXSRider Member
Number of posts : 1753
Registration date : 2010-10-25
Age : 50
Location : Dayton,Ohio
| | Subject: Re: Radio problem Sun Jan 19, 2014 9:57 pm | |
| Thank you Hobbz. After some more digging. I removed the quick connect plug and it works so their must be a short inside the plug. At least this is an easy fix. | |
|
Sponsored content
| | Subject: Re: Radio problem | |
| |
|
