Double HP

Found a smoking deal.....So I bit the bullet. 11-1 Wiseco coated piston, Hotcam Stage II, Cometic Gaskets, Kibblewhite valve springs, Dual Muzzy's. It should be on after the Fall Jam at W-R.

O lord. I need to just get mine back on her feet. I let my lil bro take it to fall jam said he saw you! Wish you woulda stopped him..... the axels out the wheels dented in and the boot is popped off.

Muddy Buddy ... sounds like my trip! Two broke ball joints, pulled the left front axle out, tore a boot and broke the center cap. Back to the OP .... just what I need is more power!!! LOL!!!

Doug has a spare Rhino in his box!!

smith700 wrote:

Doug has a spare Rhino in his box!!

Me too...... Really!!!!

I was lucky enough to have all the parts and tools in my box this time cause Doug wasn't with us. Did the repairs on trail 13 just passed the beaver dam.

Wingman wrote:

I was lucky enough to have all the parts and tools in my box this time cause Doug wasn't with us. Did the repairs on trail 13 just passed the beaver dam.

Coming out of 12 or going in?????

smith700 wrote:

Found a smoking deal.....So I bit the bullet. 11-1 Wiseco coated piston, Hotcam Stage II, Cometic Gaskets, Kibblewhite valve springs, Dual Muzzy's. It should be on after the Fall Jam at W-R.

Your lacking two things Little Smith. You need the studs, you WILL blow a head-gasket!!! KMS head to cylinder. Weller cylinder to case. You're probably listening to the guy with the slowest 727 Rhino ever built tho....... .....................An you will not double your H.P. 10 more, maybe. Sorry dude just the facts.

ridepate wrote:

smith700 wrote:

Found a smoking deal.....So I bit the bullet. 11-1 Wiseco coated piston, Hotcam Stage II, Cometic Gaskets, Kibblewhite valve springs, Dual Muzzy's. It should be on after the Fall Jam at W-R.

Your lacking two things Little Smith. You need the studs, you WILL blow a head-gasket!!! KMS head to cylinder. Weller cylinder to case. You're probably listening to the guy with the slowest 727 Rhino ever built tho....... .....................An you will not double your H.P. 10 more, maybe. Sorry dude just the facts.

Yeah double is a little much. But 10hp is not bad. If you can get 10hp.....

The top curve is with a cam only..which is 33..You can get around 3 HP with the Muzzys, and another 5 HP with the piston. That would be 41, but I am porting & polishing the head, which adds around 2-3, so that would be 43-44 HP. Also adding +1 intake and +1 exhaust valves...

porting & polishing does add hp but at the top end. It might take some from the bottom. That is the info that I have found when researching.

I think it depends on who does it........

smith700 wrote:

I think it depends on who does it........

It does not matter how does it. Your hp gain will be at higher speeds.

Big-R wrote:

ridepate wrote:

smith700 wrote:

Found a smoking deal.....So I bit the bullet. 11-1 Wiseco coated piston, Hotcam Stage II, Cometic Gaskets, Kibblewhite valve springs, Dual Muzzy's. It should be on after the Fall Jam at W-R.

Your lacking two things Little Smith. You need the studs, you WILL blow a head-gasket!!! KMS head to cylinder. Weller cylinder to case. You're probably listening to the guy with the slowest 727 Rhino ever built tho....... .....................An you will not double your H.P. 10 more, maybe. Sorry dude just the facts.

Yeah double is a little much. But 10hp is not bad. If you can get 10hp.....

8's more like it...................

ridepate wrote:

Big-R wrote:

ridepate wrote:

smith700 wrote:

Found a smoking deal.....So I bit the bullet. 11-1 Wiseco coated piston, Hotcam Stage II, Cometic Gaskets, Kibblewhite valve springs, Dual Muzzy's. It should be on after the Fall Jam at W-R.

Your lacking two things Little Smith. You need the studs, you WILL blow a head-gasket!!! KMS head to cylinder. Weller cylinder to case. You're probably listening to the guy with the slowest 727 Rhino ever built tho....... .....................An you will not double your H.P. 10 more, maybe. Sorry dude just the facts.

Yeah double is a little much. But 10hp is not bad. If you can get 10hp.....

8's more like it...................

Come on pate. I have seen the advertisements, Muzzy's alone will add 7hp....

mine added lke 50! She made 400 horses on the dyno the other day!!

I never had a Rhino.....so I wouldn't know.

I'm skipping the whole one lung performance. If it don't happen this winter then it will happen in the middle of summer but this silver bullet is getting a Can Am swap.I have two differant guys looking for a donor now.I want a RPM 912 bad.

8 will be max and I bet that engine will not last 4 months!

Where do you find that I would only get 8.
The Muzzy's alone get you 5 HP....The Cam gets you 11-13 HP....The piston gets around 6 HP.....The head porting & polishing gets 2-3....
I know of a certain Rhino with more motor mods than this, and it has lasted for 3000+ miles.
So no, that's NOT right.

smith700 wrote:

Where do you find that I would only get 8.
The Muzzy's alone get you 5 HP....The Cam gets you 11-13 HP....The piston gets around 6 HP.....The head porting & polishing gets 2-3....
I know of a certain Rhino with more motor mods than this, and it has lasted for 3000+ miles.
So no, that's NOT right.

Smith,
There's no cam in the world that will give 11 to 13 hp........................and that Rhinos probably a silver one.....it got spanked by a stock 660 with only a Dyna-tek.............

You'll learn grasshopper, the hard way...........Do what you want, believe what/who you want.........We've all been there.....

ridepate wrote:

smith700 wrote:

Where do you find that I would only get 8.
The Muzzy's alone get you 5 HP....The Cam gets you 11-13 HP....The piston gets around 6 HP.....The head porting & polishing gets 2-3....
I know of a certain Rhino with more motor mods than this, and it has lasted for 3000+ miles.
So no, that's NOT right.

Smith,
There's no cam in the world that will give 11 to 13 hp........................and that Rhinos probably a silver one.....it got spanked by a stock 660 with only a Dyna-tek.............

You'll learn grasshopper, the hard way...........Do what you want, believe what/who you want.........We've all been there.....

ridepate wrote:

smith700 wrote:

Where do you find that I would only get 8.
The Muzzy's alone get you 5 HP....The Cam gets you 11-13 HP....The piston gets around 6 HP.....The head porting & polishing gets 2-3....
I know of a certain Rhino with more motor mods than this, and it has lasted for 3000+ miles.
So no, that's NOT right.

Smith,
There's no cam in the world that will give 11 to 13 hp........................and that Rhinos probably a silver one.....it got spanked by a stock 660 with only a Dyna-tek.............

You'll learn grasshopper, the hard way...........Do what you want, believe what/who you want.........We've all been there.....

Call Todd at Hunterworks.
601-771-0072
His Rhino is making around 45 HP.
That silver Rhino had over 1k more weight on it than yours.........
Pac, can you say anything besides ????????

smith700 wrote:

ridepate wrote:

smith700 wrote:

Where do you find that I would only get 8.
The Muzzy's alone get you 5 HP....The Cam gets you 11-13 HP....The piston gets around 6 HP.....The head porting & polishing gets 2-3....
I know of a certain Rhino with more motor mods than this, and it has lasted for 3000+ miles.
So no, that's NOT right.

Smith,
There's no cam in the world that will give 11 to 13 hp........................and that Rhinos probably a silver one.....it got spanked by a stock 660 with only a Dyna-tek.............

You'll learn grasshopper, the hard way...........Do what you want, believe what/who you want.........We've all been there.....

Call Todd at Hunterworks.
601-771-0072
His Rhino is making around 45 HP.
That silver Rhino had over 1k more weight on it than yours.........
Pac, can you say anything besides ????????

That's right it did............Just remember that for future reference. Weight is the #1 power robber on a SXS. Load all those amps, lights, lids, radios, speakers, spares, bumpers, winches, sirens.......... dual batteries, ect, ect.............Keep it light and your ahead of the game. Free H.P. Oh, I ran-down that 45 H.P Rhino at Broad-River too with my lowly 660.............Light Is Right...........

smith700 wrote:

ridepate wrote:

smith700 wrote:

Where do you find that I would only get 8.
The Muzzy's alone get you 5 HP....The Cam gets you 11-13 HP....The piston gets around 6 HP.....The head porting & polishing gets 2-3....
I know of a certain Rhino with more motor mods than this, and it has lasted for 3000+ miles.
So no, that's NOT right.

Smith,
There's no cam in the world that will give 11 to 13 hp........................and that Rhinos probably a silver one.....it got spanked by a stock 660 with only a Dyna-tek.............

You'll learn grasshopper, the hard way...........Do what you want, believe what/who you want.........We've all been there.....

Call Todd at Hunterworks.
601-771-0072
His Rhino is making around 45 HP.
That silver Rhino had over 1k more weight on it than yours.........
Pac, can you say anything besides ????????

yah i can say you are an 18 year old IDIOT