OK here is where I stand now. My top cylinder will stop firing when I crank it over after about 3 sec. You and stop and re-crank it over and it does the same thing. I have replaced the coil, cut 1/4 of the tip of the plug wire, and still the same thing. I have the Dana non programmable cdi with there coils. This problem just started, I noticed a big lose of power and popping. I started checking and this is where I am at now. Any ideas on what might me the problem. thanks
Now after talking to a few people on other forums, that had a 08. They say that there does this also, but i know this is not right. I have even talked to Todd at Hunterworks. He says it is not right. Guess I need to try and change out my cdi and see if this changes the problem.
