Race Tested - Trail Approved The Holz Racing Products XC narrow suspension for the Polaris RZR-XP 900 will bring the track width of the XP-900 down to 57inches with the use a 5+2 offset wheel. Nearly 2 inches of increased ground clearance under the trailing arm due to our slim design. Trailing arms are 1 inch shorter than stock for improved traction.
Stout 4130 tig weld Chromoly steel construction. The boxed design of the rear trailing arms and front upper a-arms further enhance the durability of the XC suspension due to the internal cross bracing that increase the component strength without any substantial weight increase. Improved suspension geometry for easier steering and smoother travel. Utilizes OE bushings and ball joints. Will accept the factory rear sway bar.
Kit Includes: Upper/Lower front A-Arms High-Clearance Trailing Arms Complete HD Tie Rods - complete with OE style inner rod end and heat treated, teflon lined outer rod end. Complete HD Radius Rods - complete with high quality, heat treated, teflon lined rod ends HD Axles w/new CV boot clamps (re-use OEM CV boots and CV joint)
