Wheel bearing greaser

would be nice when putting new bearings in but if im going to tear it down that far i will just change them

Very nice!

I used this on my new turbo with 10 miles. I primed the greaser and each bearing took 9-10 pumps on a full size grease gun. Awesome tool!

Yeah don't know if I would tear it all the down and not go back with new bearings but, it would be great to shoot the new bearing full of grease.

neat idea...............

You could pull the axle pretty easily & grease it in between rides.

I ended up getting getting one of these. I bought the one for the 800 rzr because you get 2 tools the front tool for 800 will fit the newer 900 and 1k bearings.

I used the tool today on 2 super Dave bearings. Took 7 pumps to get any grease out to the seals.

That will slow down the buying of new bearings I bet. You might never have to buy a bearing again!

Yea, I finally got around to Emailing them. Is there another way of contacting them?

Thanks Bush. I got it figured out. I had to order the kit for the RZRS, which has 2 different size greasers. The one for the front bearing fits the front and rear of the RZRXP 900. I got the order in.

Gimpy wrote:

Thanks Bush.  I got it figured out.  I had to order the kit for the RZRS, which has 2 different size greasers.  The one for the front bearing fits the front and rear of the RZRXP 900.  I got the order in.

That's what I done so I could do dads and my brothers rangers

Used mine on the XP. It works great. I used a pneumatic grease gun. It took 10 shots on the right front and 14 shots on the left front to get grease to flow out.