Tiger Tool vs the Greaser

I bought the Greaser tool last year.  You had to pull your hubs to use the tool.  Pushrod talked about a different one on Ebay or Amazon for $34.00, that you do not have to pull your hub.  I found it, but when I looked at what else was out there, I paid a little more and bought the Tiger Tool from Amazon.  I liked it because of the O ring in the back of it.  I felt it would seal better when inserted in the hub.  You only have to pull your caliper off and take your axle nut and washers off.

Had to edit my post!! I did the UTV inc greaser. Axle nut and rotors come off!!

I pulled all my axles never seized all the splines, used the greaser while I had all apart. worked good . mine don't have the o-ring. ,, but grease don't scare me, we have fun in the shower tryen to get all the grease off. (I love my greaser )

I have the one from two guys hobby. I just have to remove one of the ball joint bolts or one of the a arm bolts. One more bolt not that big of a deal.  I would buy the cheapest one and go with it if I was to buy today