Carb Cleaning

I need some help with getting the carb out I don't want to screw anything up or take out more then what I need

If you are like me.....I dont have memory for shit. I always take a pic for reference. Loosed the boots, remove the throttle and choke cables. Also remove the other vacuum lines. It will now come out with some twisting and freeing it of the boots. I guess you could leave the throttle cable in tact if you just want to get to the jets. I would suggest cleaing the whole carb though. Probably the worst part, for me anyway, was getting that seal to stay in place when you go back to put the throttle cable cover back on. I finally put a lil grease on the seal so it would stay in place. If you haven't adjusted the throttle cable since new now is a good time to do that. They do stretch. Remove 2, 8, 9, 10, 12, 19, and 35 and clean.

Thanks Dave.

on a side note any news on tip?

Yes.....it will never get there if I dont mail it. I will do that tomorrow.

I dunno where to start it will run but just spits and sputters, I reinstalled everything the way it came out carb cleaned it all blew it out with air gun, now this