Mud-and-Guts 450 Rhino

I know I should have done this earlier instead of creating so many threads but I guess better late than never. I just hope I don't forget to much.

14x8 DWT Diablos with 3+5 offset
26x14 GBC Grim Reaper 8ply tires
Pro Armor Baja style bumper
Pro Armor Safari Rack
Pro Armor soft cargo cover
Pro Armor winch mount
Progressive suspentions 425 H/D shocks
Beard Super TSX seats
UTV Crap seat bases
Crow 2inch 4-point harnesses
Speed industries Harness Bar
Siezmik Modular Door system
KFI wide spool 4000lbs winch
EMP Radiator Guard
Yamaha Half windshield
DatstarMX Grab bar
Wal-mart munchkin Baby mirror
Dyno-jet Jet kit
Big Gun CDI
EPI 12 Gram clutch weights
EPI blue clutch spring
2X Motorsports Machined clutch Sheave
Herculiner Bed-liner

Almost stock(other than the wheels and tires)



A recent Pic.

Looking good I like the new wheels and tires.

Nice. I love those wheels.

I got a few more Items in today that add a little bling to my Rhino lol.

So far I am really digging the new pedals I haven't had time to really try them out due to the rain but I hope to real soon.

On a side note if you have not removed your pedals and greased them I recommend you do ever so often. It is a real easy task that includes 2 clips and a few springs.

Damn mud......... you are going to run out of money!!!!!

Big-R wrote:

Damn mud......... you are going to run out of money!!!!!

So true.

I am expecting a few more items tomorrow...

Cann't afford to trade up so ..................

looks like those might have some non-slip teeth on them.
that would be nice when your all muddy

Is this the start of chapter 2 of this on going saga? I just hate when their like this........the anticpation of what is going to happen next is killing me!

Keep it up, or until the money runs out......

Great looking Rhino nice

Nice Pedals.

good looking ride!

I got to ride it some today with the new pedals and I got to say they not only look good but they feel a lot better than stock. Plus something I really like is the top of the pedals are lined with allen head screws which are replaceable. So if they start looking bad you can replace the screws (from the local hardware store) polish the pedals and have a new set again.


Got a few new items today, I got EMP's a-arm skids, their top half windshield, their clamps for their windsheild and their clamps for my Yamaha lower.

The reason I got their clamps for my Yamaha lower is because they are thinner material plus a wider material so my Seizmik doors with the upper attached will seal better to the cage. Blocking the cold... These clamps are also quick connect so you can easily remove both windshields and replace without having to remove the actual clamps.









I really like these skids because of the drain holes for mud and water.



Here's a pic. with both windshields installed.

Were did you get the top half of the windshield?


Tim

tim wrote:

Were did you get the top half of the windshield?


Tim

EMP (Extreme metal products) Great people to work with. I also got 4 extra clamps to use with my Yamaha lower.

They are quick connect clamps, You can remove the windshield at any time with not tools.

Got the QuadBoss overhead stereo compartment and stereo today. I really like the setup but had to make a few mods to get it to work on my setup.

First mod was the overhead center grab bar had to go, This bar was never used on my bike so I just cut it off(easy fix).

The second mod was I had to make some 1-1/4 inch spacers to lower the overhead unit. because without the spacers the overhead unit was hitting on the factory Yamaha SE top and would not mount flush. Were it was hitting I did not want to modify the top because it would have made it considerably weaker (at the front mounting points) and I was afraid when towing at 60-70 something bad might happen lol.

I went to the local hardware store and got some electrical conduit connectors and cut them down to 1-1/4 inch for spacers. I also picked up some 3/8 inch 4 inch long bolts to mount the unit to the supplied brackets. I also picked up some 3/8 washers to use inside the spacers to keep them centered on the bolt.

Once mounted everything works and sounds fine, the head unit is a little low but my seats set lower than stock so I don't think I will have any problems with it.

cool set up Neil.

Nice man!!!!!!!! Give us a tune-report when you get it fired-up.

I really like the look of that unit. But I know that one cost you a buck or two!!!!!

Looking Good Mud..... .......

ChrisC wrote:

Looking Good Mud..... .......

One can never spend to much on tunes

Lookin good there M & G

Thanks All,

ridepate wrote:

Nice man!!!!!!!! Give us a tune-report when you get it fired-up.

As for tunes I feel a good set of fosgates are in its future.....

The sound is pretty good but I feel with a good set of speakers it could be better..We will see....

Got my Tusk rear window installed today. Easy install with 6 straps and some velcro. The Harness bar makes it a little bulky but still works fine.



Here is a pic with my door tops and all installed.

Nice and warm................

Lookin good.........can't wait to see it in person next weekend.

you got her sealed up good Mud.....