RZR tire ?

I will be getting my RZR this week. I went with a standard. What is the biggest tire size that I can go to without rubbing? I would like to get some 26's.

You will be fine with 26"s. I would say you could even go with 27"s.

Ya, 26" will be fine...a buddy has 27" Dirt Devil's and still has quite a bit of room.....

So I should be able to go to at least 26" without rubbing. I might try to push it and go 27".

You will be fine with 26"......27", my buddy had brand new Dirt Devil 2 XT 27s on his and he could turn the wheel lock-to-lock and they wouldn't hit.....so I would think you would be fine, but it depends on the tire.....but don't get the Dirt Devils....they are junk...try Bighorns, the new XTR'S, The GBC Spartacus or Grim Reapers....the GBC ones are 8 ply...I think I am gonna try the new XTR'S with the rim guard or the grim reapers my next tire buying spree...

JeepKuntry wrote:

I will be getting my RZR this week.

Congrats on the new RZR. Dont forget to post up some pics.

Ya....post some pics of it!

I have a 2010 LE that I had 26" Bighorns on with 2" spacers all the way around with a ROKTEK lift and they would still rub in the front. If you go with Bighorns they are oversized a bit and I know for a fact that 26" Bighorns will rub.
Also if you run 26" Bighorns on the back without a severe offset wheel or wheel spacers they will rub the motor mounts
Kevin

I just put the polaris long travel kit on mine so I have some parts that i could sell
2 sets of 2" wheel spacers (4 spacers)
1 set of 1" wheel spacers (2 spacers)
Roktek Lift and you can have my sway bar that already have the extensions on it
Set of King Shocks

P.S. Congrats on the new ride

kevinm wrote:

I have a 2010 LE that I had 26" Bighorns on with 2" spacers all the way around with a ROKTEK lift and they would still rub in the front. If you go with Bighorns they are oversized a bit and I know for a fact that 26" Bighorns will rub.
Also if you run 26" Bighorns on the back without a severe offset wheel or wheel spacers they will rub the motor mounts
Kevin

I just put the polaris long travel kit on mine so I have some parts that i could sell
2 sets of 2" wheel spacers (4 spacers)
1 set of 1" wheel spacers (2 spacers)
Roktek Lift and you can have my sway bar that already have the extensions on it
Set of King Shocks

P.S. Congrats on the new ride

Kevin you are right. I forgot about my RZR before I added LT. I had 26" Bighorns and they did rub in the front when making hard turns. It was not that bad. I could live with how little it rub.