HW Cam

Anyone used JUST the Rhino 700 Stage 1 camshaft from Hunterworks. It shows 13HP gain.......and for $138.00 I might look into it. If you have used this, have you had any problems with axles snapping? Have you had to change the valves? Anything acting abnormaly? Running hotter than usual? Do I really have to get the MSD and the Muzzy duals from them? to be able to use this kit? I would rather get the LEXX exhaust than the $900 Muzzy's. Do I really need the MSD to use it? Is reprogramming required for this? I don't want to crack into the piston and put the 11-1 J/E Piston in it....If I absolutely HAD TO change to the 11-1 piston, I would add the 727cc Stroker Crank......I am getting carried away.
I would like to see what this thing would do with following mods though, but they won't go on mine.
1. Stage 1 Cam?????
2. Stroker 727cc Crankshaft
3. J/E 11-1 Piston
4. LEXX Exhaust/with programmer.

My uncle is thinking about the stage 1 HW cam also. He just got the MSD and the new 18gr greaseless weights. He can now hit 55 mph. I would assume you don't need the muzzy's just any aftermarket exhaust that will flow more. Also you more than likely will need some programmer that can add and take fuel away and maybe timing to get the correct a/f. But if you get his MSD he has it already programmed for many different setups of his. I think in his website somewhere you can get 60-62 with the cam and exhaust.

I do know that Hunterworks has really got those 700's puttin out!

wvyankee2 wrote:

I do know that Hunterworks has really got those 700's puttin out!

Wonder if I can get him to work on my wife?

bigbore wrote:

wvyankee2 wrote:

I do know that Hunterworks has really got those 700's puttin out!

Wonder if I can get him to work on my wife?

bigbore wrote:

wvyankee2 wrote:

I do know that Hunterworks has really got those 700's puttin out!

Wonder if I can get him to work on my wife?

anyone have a 110 lb loaner ?

Corey, Just call Todd. He's a real cool guy and can give you all the info you need......

I'm calling him tomorrow morning. I will probably wait until my warranty runs out before I add the Cam/Piston anyway. But I will be adding an exhaust system soon!

bigbore wrote:

wvyankee2 wrote:

I do know that Hunterworks has really got those 700's puttin out!

Wonder if I can get him to work on my wife?

Dayum. If he could do that there would be no need for him to sell to sell SXS parts.

nocerisdave wrote:

bigbore wrote:

wvyankee2 wrote:

I do know that Hunterworks has really got those 700's puttin out!

Wonder if I can get him to work on my wife?

Dayum. If he could do that there would be no need for him to sell to sell SXS parts.

He would be wealthier then Bill Gates.....

I have been on the phone with about 3 people. They all say that there are 4 mods that will be awesome for the 700.
1. Wiseco 11-1 Piston
2. Stage 1 Camshaft
3. Muzzy Duals
4. Todd's MSD
Maybe Clutch Sheave. I figure with all that it will hit at least 62......But I keep hearing negative and positive about the duals.....

Im runnin the muzzy duals and I love em! Your a brave man tearing into that motor! Shes gonna be sick when you get done tho!!

i have the dual muzzy's,msd ,18g od weights,gold spring & k&n air intake system .. and hit 55-57mph, the cam should take you to 61-62 for sure

Todd's race Rhino will run 68mph!!!
Gotta put the motor build on hold until I get my frame fixed.

i have rode in his rhino it is really quick and gets up there asap !!

I need to call him..........

smith700 wrote:

Todd's race Rhino will run 68mph!!!
Gotta put the motor build on hold until I get my frame fixed.

Sounds like it is time for a new machine.......

Big-R wrote:

smith700 wrote:

Todd's race Rhino will run 68mph!!!
Gotta put the motor build on hold until I get my frame fixed.

Sounds like it is time for a new machine.......

Decisions.....decisions.....