STOCK RHINO PARTS

IF YOU GUYS NEED RHINO PARTS WE HAVE EVERYTHING YOU NEED
AXLES COMPLETE 125.00
SPINDLES W BEARING AND SEALS 99.00
STEERING RACKS 125.00
EVERYTHING IS BRAND NEW
CV BELTS 99.00
ETC YOU NAME IT WE GOT IT
PLUS FREIGHT ON ALL ABOVE
BAKERSFIELD RHINO INC
661 399 0034

42'' LED LIGHT BARS 840.00
EAGLE EYE HID HEADLIGHTS 149.00 SET

Dang!!! I see a stock Rhino belt in there....how do they compare to the EPI belt??

smith700 wrote:

Dang!!! I see a stock Rhino belt in there....how do they compare to the EPI belt??

WE HAVE TRIED THEM ALL,AND THE STOCK HOLDS UP BETTER THAN ANY,BIGG MOTORS,DRY CLUTCH ETC THEY LAST A FEW HUNDRED MILES MORE

How much would a stock Yamaha belt cost?

smith700 wrote:

How much would a stock Yamaha belt cost?

OEM RHINO BELTS ARE 99.00 PLUS FREIGHT

I know I am going to need one with bigger motor going on it.

smith700 wrote:

I know I am going to need one with bigger motor going on it.

WHAT SIZE MOTOR, WHOS DOING IT, WANT US TO SHIP THE BELT OUT,
MAYBE WE CAN SAVE YOU SOME MONEY ON THE MOTOR BUILD
LET USKNOW

Oh nothing big...the power pack #4 from Hunterworks. I thought about the Trinity 770 kit.....

smith700 wrote:

Oh nothing big...the power pack #4 from Hunterworks. I thought about the Trinity 770 kit.....

IF WE CAN HELPYOU OUT WITH TRINITY WE ARE A BIG DEALER WITH THEM MAYBE SAVE YOU SOME MONEY,ALSO CHECK OUT THE WELLER 734 VERY GOOD MOTOR ALSO

I think a cam will be good enough for me.......but thanks anyway!!

smith700 wrote:

I think a cam will be good enough for me.......but thanks anyway!!

NOT A PROBLEM ENJOY

I thought about the Trinity 734, and their 770 motors......But I considered the possibility that I might not have my Rhino past next spring.....and I didn't want to have my motor giving me problems with over 3000 miles on it in a year. That is the main reason I picked the Hunterworks parts, which consist of a Camshaft,MSD,Muzzy Pipe,OD Greaseless weights. And it will run the same speed as the Trinity motor parts, at a much smaller cost. If I decide to keep the Rhino, I will probably add a 11-1 Piston,port/polish.
I am not building my motor for speed, I am building it for low-end power......I will take speed with it, but it's not what I am building it for.

smith700 wrote:

I thought about the Trinity 734, and their 770 motors......But I considered the possibility that I might not have my Rhino past next spring.....and I didn't want to have my motor giving me problems with over 3000 miles on it in a year. That is the main reason I picked the Hunterworks parts, which consist of a Camshaft,MSD,Muzzy Pipe,OD Greaseless weights. And it will run the same speed as the Trinity motor parts, at a much smaller cost. If I decide to keep the Rhino, I will probably add a 11-1 Piston,port/polish.
I am not building my motor for speed, I am building it for low-end power......I will take speed with it, but it's not what I am building it for.

PERFECT LET US KNOW HOW IT RUNS AFTER YOU INSTALL ALLOF IT
THANKS BRMINC

Todd expects it to run about 63.

i bought set of rear axles from these guys and they have held up great! great product and service. i had the superatv axles and they both blew out of the diff in 5 minutes. BRM have been running strong for about 6 monthes now. im turning 27'' xtrs and slinging lots of mud. i will be getting a pair for the front too when needed. no way your going to get two oem axles to your front door for about $250

Hey BRMINC....can you get me a price on a Stage II Rhino hotcam w/ gasket, Wiseco 11-1 piston w/ gasket, Muzzy Dual exhaust??

moto92 wrote:

i bought set of rear axles from these guys and they have held up great! great product and service. i had the superatv axles and they both blew out of the diff in 5 minutes. BRM have been running strong for about 6 monthes now. im turning 27'' xtrs and slinging lots of mud. i will be getting a pair for the front too when needed. no way your going to get two oem axles to your front door for about $250

THANKS FOR THE PROPS AND GLAD THEY ARE WORKING GREAT FOR YOU
LET US KNOW WHEN YOU NEED THE FRONTS
THANKS BRMINC

smith700 wrote:

Hey BRMINC....can you get me a price on a Stage II Rhino hotcam w/ gasket, Wiseco 11-1 piston w/ gasket, Muzzy Dual exhaust??

NOT A PROBLEM I WILL GET YOU PRICES AND GET BACK TO YOU

Alright, thanks.......

BRMINC wrote:

IF YOU GUYS NEED RHINO PARTS WE HAVE EVERYTHING YOU NEED
AXLES COMPLETE 125.00
SPINDLES W BEARING AND SEALS 99.00
STEERING RACKS 125.00
EVERYTHING IS BRAND NEW
CV BELTS 99.00
ETC YOU NAME IT WE GOT IT
PLUS FREIGHT ON ALL ABOVE
BAKERSFIELD RHINO INC
661 399 0034

42'' LED LIGHT BARS 840.00
EAGLE EYE HID HEADLIGHTS 149.00 SET

JUST TO HELP OUT FELLOW OFFROADERS JUST BEFORE HOLIDAYS WHEN MONEY IS BEING SPENT TO GO ON TRIPS WE RUN OUR 99.00 VALUE MENU


THIS INCLUDES,


BRAND NEW STOCK SPINDLES W/ BEARINGS AND SEALS 99.00 EA
OEM RHINO BELTS 99.00 EA
STOCK RHINO RACKS 99.00 EA
BRAND NEW AXLES COMPLETE 99.00 EA
99.00 99.00 99.00 99.00 99.00 99.00 99.00 99.00
LET US KNOW IF ANYTHING IS NEEDED
THANKS

holy crap...$99 axles!!!
what holidays are we talking about here