| Did some maintenance today | |
|
|
Author | Message |
---|
AIRBORNE SSXSRider Member
Number of posts : 6266 Registration date : 2008-05-01 Age : 50 Location : Morgantown, West Virginia
| Subject: Did some maintenance today Sat Feb 20, 2010 6:07 pm | |
| For you RZR owners that have not taken out your kingpins out by the rear hubs, I highly suggest you check them. At almost 800 miles mine were quite rusty. I roughed them up and coated them with grease so hopefully they will be okay. I know I need to get hot on the Rhino next. I hope those are not ruined. | |
|
| |
Mud-and-Guts SSXSRider Member
Number of posts : 1839 Registration date : 2008-09-22 Age : 45 Location : celina,tn
| Subject: Re: Did some maintenance today Sat Feb 20, 2010 8:19 pm | |
| At 1400 I replaced the ones on my rhino. They were not rusty but the bearings had a little play so I replaced them and the bearings while I had it all apart.
Do the RZR's have grease fittings like the Rhino? I try to grease mine atleast every couple rides.. | |
|
| |
AIRBORNE SSXSRider Member
Number of posts : 6266 Registration date : 2008-05-01 Age : 50 Location : Morgantown, West Virginia
| Subject: Re: Did some maintenance today Sat Feb 20, 2010 8:36 pm | |
| The ones inside (near the diff) do, but the outers you kinda have to tear apart and pack full of grease. Those are the ones I took apart today. | |
|
| |
ridepate SSXSRider Staff
Number of posts : 6409 Registration date : 2009-04-23 Age : 63 Location : 1st join date- 1/22/2008- North Ga.
| |
| |
AIRBORNE SSXSRider Member
Number of posts : 6266 Registration date : 2008-05-01 Age : 50 Location : Morgantown, West Virginia
| Subject: Re: Did some maintenance today Sat Feb 20, 2010 8:37 pm | |
| Gonna get all the routine stuff done on the S, then I am gonna turn my attention to the Rhino and get some stuff done to it. | |
|
| |
Mud-and-Guts SSXSRider Member
Number of posts : 1839 Registration date : 2008-09-22 Age : 45 Location : celina,tn
| Subject: Re: Did some maintenance today Sat Feb 20, 2010 9:34 pm | |
| | |
|
| |
ridepate SSXSRider Staff
Number of posts : 6409 Registration date : 2009-04-23 Age : 63 Location : 1st join date- 1/22/2008- North Ga.
| Subject: Re: Did some maintenance today Sat Feb 20, 2010 9:42 pm | |
| | |
|
| |
Mud-and-Guts SSXSRider Member
Number of posts : 1839 Registration date : 2008-09-22 Age : 45 Location : celina,tn
| Subject: Re: Did some maintenance today Sat Feb 20, 2010 10:37 pm | |
| - ridepate wrote:
Yes, you can. On the list............ It seems everytime you cross one off the list two more get added..... | |
|
| |
nocerisdave SSXSRider Member
Number of posts : 5674 Registration date : 2008-01-22 Age : 58 Location : Laceys Spring AL
| Subject: Re: Did some maintenance today Sat Feb 20, 2010 10:52 pm | |
| Thanks for the reminder Airborne. Thats where all the break down starts is at those pins. Once they are loose everything else goes to hell in a hand basket. IMO | |
|
| |
ChrisC SSXSRider Member
Number of posts : 5483 Registration date : 2008-06-30 Age : 57 Location : Marietta GA
| Subject: Re: Did some maintenance today Sun Feb 21, 2010 3:00 am | |
| I pulled the bushing out of the spindles and greased them before i ever rode it. thay are dry from the factory. | |
|
| |
Sponsored content
| Subject: Re: Did some maintenance today | |
| |
|
| |
| Did some maintenance today | |
|