| | Lifter noise/ problem |  |
|
|
| Author | Message |
|---|
cingram
Number of posts : 5
Registration date : 2011-11-28
Age : 55
Location : Franklin
| | Subject: Lifter noise/ problem Mon Dec 05, 2011 4:04 pm | |
| Ok, I was riding this weekend in Windrock in toward the end of our last day one of the valve lifters in my engine started making noise. Of course when this happened, one of the cylinders would quite firing and it would run bad for a bit then it would pick the cylinder back up and run fine. I could tell when it was about to run bad because it would start making a tapping noise as if the lifter had lost oil or something. Has anyone else had this issue? Does anyone have any suggestions ? | |
|
| | |
bush
SSXSRider Staff
Number of posts : 6141
Registration date : 2008-06-06
Age : 40
Location : Castlewood VA
| | Subject: Re: Lifter noise/ problem Mon Dec 05, 2011 4:08 pm | |
| what machine? mods,miles,year...... | |
|
| | |
cingram
Number of posts : 5
Registration date : 2011-11-28
Age : 55
Location : Franklin
| | Subject: Re: Lifter noise/ problem Mon Dec 05, 2011 4:26 pm | |
| Sorry, I guess that is important, Its a 2009 RZR s with a Big Gun exhaust, 1000miles | |
|
| | |
GunRunner
SSXSRider Member
Number of posts : 5296
Registration date : 2008-01-22
Age : 70
Location : North Georgia,
| | Subject: Re: Lifter noise/ problem Mon Dec 05, 2011 5:47 pm | |
| Sounds like you got the ecm (behind driver seat) wet, pull the plug off of it and smear it full of dielectric grease and that should fix it. Its a good idea to add it to every connection you can get to. | |
|
| | |
stealth
SSXSRider Staff
Number of posts : 2219
Registration date : 2009-07-14
Age : 52
Location : Wise Va,
| | Subject: Re: Lifter noise/ problem Mon Dec 05, 2011 6:16 pm | |
| Also check the ground, If you are not getting the right voltage it will make them run rough. | |
|
| | |
Dean
SSXSRider Member
Number of posts : 1210
Registration date : 2010-12-18
Age : 53
Location : Jackson, Ky
| | Subject: Re: Lifter noise/ problem Mon Dec 05, 2011 6:32 pm | |
| If u dont have warranty on it BURN-IT buy 1 that does  | |
|
| | |
cingram
Number of posts : 5
Registration date : 2011-11-28
Age : 55
Location : Franklin
| | Subject: Re: Lifter noise/ problem Tue Dec 06, 2011 12:33 am | |
| Does a bad connection at the ECM cause a tapping noise that sounds like a faulty lifter? | |
|
| | |
Craig_C
Number of posts : 737
Registration date : 2010-06-21
Age : 41
Location : Corydon, IN
| | Subject: Re: Lifter noise/ problem Tue Dec 06, 2011 1:50 am | |
| Obviously check oil level. Whens the last time it was changed and what oil was used? First thing to look at is oil pressure, alot of RZRs came from the factory with oil pressures out of spec. Dragonfire and Holz sell and adjustable regulator to get the pressure where it needs to be. It woulnd be the first RZR Ive seen with lifter issues, but it would be the first Ive heard of that does it while driving. | |
|
| | |
cingram
Number of posts : 5
Registration date : 2011-11-28
Age : 55
Location : Franklin
| | Subject: Re: Lifter noise/ problem Tue Dec 06, 2011 9:47 am | |
| Polaris oil is what is in it, probably has 600miles on the oil and is ready for a change. Didn't realize there was an oil pressure issue on the RZR. I will check into that too | |
|
| | |
Craig_C
Number of posts : 737
Registration date : 2010-06-21
Age : 41
Location : Corydon, IN
| | Subject: Re: Lifter noise/ problem Tue Dec 06, 2011 2:44 pm | |
| | |
|
| | |
Sponsored content
| | Subject: Re: Lifter noise/ problem | |
| |
|
| | |
| | Lifter noise/ problem | |
|
