Seatbelt pics and brackets to assist with aftermarket belts- Brackets made

Can someone take pics of the factory seatbelt mounts on the waist portion of the belt on the Rhino. I would like to get a look at both mounts (the one close to the door and the one close to the center hump) if it is not too much trouble. Thanks alot. You guys rock!

Here ya go Bro.

Yank, I have a guy over here that may be able to make those little brackets for the snap on seatbelts to use in conjunction with the factory setup. I do need some measurements for the holes. How big of a diameter bolt are the factory mounting bolts? Does anyone know or would anyone mind please giving me the diameters of the bolts holding in the factory belts at the mounting points? I would be VERY appreciative.

Here are the brackets. I had some 4" made and some 5". Don't know which one will work better till I get home and install the bar and belts. I think they will work okay. I plan on putting them "under" the factory belt mounts. At only 1/4" thick, I think the factory bolts should work without having to get longer bolts. What do you guys think?

OH, I forgot to mention that I have new belts with snap-ends. That is what the channel is for. The round hole is for the mounting bolts (where Yank took the pictures above).