A few mods to add

shawnley1222 wrote:

I just found my UNI filter to install I forgot about that I need to oil it up and toss it in there also :D

Shawn , also put a thin coat of grease around the lip
of the filter where it seals to the box....
really helps seal it up good.

shawn

Well I tested out the speaker bar and radio before I installed everything and worked fine so I soldered all the connections to make them more permanent and got everything thrown up there (not the prettiest wirine job, but I plan on fixing after tomorrows ride) but now I got nothing no overhead lights, radio power sound NOTHIN!!!! I am hopoing if I run the ground to the lower frame it will fix it but I am done messing with it tonight so any suggestions to try?


all fuses are still good not getting jack shit on anything of the newly installed mods(they DID work when I tedted it all in a jumbled mess)

Shawn , its pretty simple really.
if it all worked before you installed everything.
you have a bad connection somewhere....

First , I would start checking Grounds and go from there...

ChrisC wrote:

Shawn , also put a thin coat of grease around the lip
of the filter where it seals to the box....
really helps seal it up good.

Have you contacted Polaris yet?

DirtDawber wrote:

ChrisC wrote:

Shawn , also put a thin coat of grease around the lip
of the filter where it seals to the box....
really helps seal it up good.

Have you contacted Polaris yet?

ridepate wrote:

DirtDawber wrote:

ChrisC wrote:

Shawn , also put a thin coat of grease around the lip
of the filter where it seals to the box....
really helps seal it up good.

Have you contacted Polaris yet?

I doubt Polaris would even call him back.......

I am going to try and reground it but dont see why the crossmembers above should be sufficent groundin so I guess i'll have to tear them all apart and re connect each one by one :evil:


does everyone or anyone agree the overhead crossarms should be a good ground?

shawnley1222 wrote:

does everyone or anyone agree the overhead crossarms should be a good ground?

Not really Shawn. all the cage is coated with stuff almost like
bed liner coating. it may not be grounded very well.

on the cross bar under the hood which is part of the frame.
i made a ground block for all my accessories . and its
all grounded there or the battery. some stuff you cant ground
to the battery or you will get motor noise in the speakers.
Ground it to the frame. and i bet all will work...

Chris that is what I was going to rty first I just gotta extend my ground cables now I hope that fixes it that would be an easy fix

Well it was my ground easy fix and as far as my lights the cheap in-line fuse was strecthed too tight i'll be replacing that with a spade pe in-line after today but I did a quick install so I could have it for today's or tonight's ride rather

shawnley1222 wrote:

Well it was my ground easy fix and as far as my lights the cheap in-line fuse was strecthed too tight i'll be replacing that with a spade pe in-line after today but I did a quick install so I could have it for today's or tonight's ride rather

Glad you got her fixed up.....
I had a feeling that was the problem.....

Well I added a few things

Front Diff Support



New chopped up winch plate made a rookie mistake and cut wrong side but now I can have both on there



Radiatior Guard








Now just gotta grind down whats left of a weld n the rear to mount rear diff gusset and rewire my winch since my relay took a dump gonna run it straight

Good stuff Bro! Remember, mistakes make you smarter! :D

DirtDawber wrote:

Good stuff Bro! Remember, mistakes make you smarter! :D

In that case, I must be a genius.

Looking good dude. Why the radiator guard? With all the deep stuff you do, I would think it would hold more mud in than what you would want.

Not all my riding is in the mud I tend to have a tendency to drift off into the thick stuff and a place we ride sometimes lots of hidin joys under the tall grass and what not just a little extra precaution

Your gittin er Done Shawn......

One piece at a time

shawnley1222 wrote:

One piece at a time

Just like Johnny Cash......

Airborne LT wrote:

shawnley1222 wrote:

One piece at a time

Just like Johnny Cash......

Exactly it popped up on my Mp3 player while I was at the gym the other day


it cost me a little more then a dime though