radaitor wash

i keep hearing about the radaitor washing tools, please some pictures? Thanks

I have always been able to get mine clean with the garden hose.

PM RedNeckRhino. He has the info you need.

mine is very similar but smaller diameter pipe. I used 1/4" and it works like a charm

I remove the oil cooler and wash good with the garden hose.

ya I need to make a new one for more pressure

Mine ain't low no-mo...........it's way up there. But great idea. If you don't fly thru the mud and cover the rad with splash, you have no worries. It's called less on the go-pedal......

kinda like this................pate.........

That's it!!!!!!! Slow and methodical..........What;s the hurry right?? As long as you get thete...

well some times it dont matter how slow you go since it comes up over the hood wonder what the guy on EBAY is using to make his out of

$36.50 seems high on ebay. Seems easy enough to make...

ya I would never pay that much it cost less then $5 to make it

they could be made cheaper but they look like shi..... about 13 parts ,6.50 to ship,gas and travel time.do the math.what would u charge to make em and go ship them.theres so time involed.this sale is for people that just want to order and not fool with making one. :D

this sale is for people that just want to order and not fool with making one

That's me! Someone has gotta be able to do better than $36.50. Or just post directions so I know exactly what to do...

What is everyone using to attach it to the garden hose? I have some 3/8 inch copper I was think of just cutting an old hose slide in the copper and put a couple clamps on it but I would rather not cut my hose if I didn't have to.

u can get fittings at the harware.screw right on.u dont have to cut the hose

I looked at the hardware this morning and found nothing but I will look again tomorrow if I got more time.

Randy I am going to make another so I have one at home and one in the trailer. I will make you one while I am at it.

most hardware s have the ones that go to 1/2 in.i had to go to a plumbing supply to get the ones for 3/8.u can use 1/2 in but in order to get it into the gap u need to sqeeze it in a vise or something .and it looks like shi........

by shawns pic i dont see how he gets it in the gap very well.it looks way to fat.

Neuro -- You are the man!!

I made me one with a metal tank and a flo jet 12 volt pump and spray gun from TRACTOR SUPPLY it holds 3 gal of water and sits under the driver seat of my RHINO

i have a marine pump that i carry

I get in between I just flattened it out some I want to make a smaller one for more pressure but this one works good too. I used that cause it was the first/easiest piece I grabbed at work