what size trailer?

ok so i need to know what size trailer i can put a rzr in. The snow has mine covered up to the point that i dont wanna dig it out. I need to run to Pa tomorrow and pick up the 2010 RZR S that I have been talking to a guy about.
Im going to use Uhaul trailer. Whats the smallest I can get away with? Should I get something with a double axle only?

5.5' X 10' Double axle would tow better but not really necessary.

If they have a car hauler trailer you should be ok. but if you are getting an enclosed trailer make sure you measure height and width of the door according to Poraris the the S is 106 in long 60.5 in wide and 70.5 in tall and the stock dry weight is 1000 lbs

hope this helps

6x10 is the best. 5x8 is a nightmare to pull one on.

Man all uhaul has is 5x9. do you guys think that will be alright? im pulling with a 2009 2500hd

rottenrhino wrote:

Man all uhaul has is 5x9. do you guys think that will be alright? im pulling with a 2009 2500hd

depends on width, 5 feet is 60 inches, rzr s is 60.5'' wide, some trailers say 5feet but are a tad wider, some are not. the 9 ft long will work. they rent car trailers, get one of them.

rottenrhino wrote:

Man all uhaul has is 5x9. do you guys think that will be alright? im pulling with a 2009 2500hd

a 5x9 should haul it just make sure you have good tongue weight. you may need to back it on just depends on the axle location. i haul mine on a 5x10 but i have to use ratchet straps to pull the wheels together. hook the strap to each a-arm and pull it tight. helps to lift up as you pull it tight.

I haul mine on a 5X12 it works fine just a lil tight.

I had mine made a tad wider. its right at 6 1/2 x 10.
it works perfect for my S.....


Bush that seems like a lot of work just to load your S.
if you lived closer to me. i would widen that trailer a bit for you....

Chris....

This is way off topic.... but

dont do what i did and make a trailer out of an I-beam ..........dont know how long or wide it is.....it will hold my rhino and grizzly perfectly......but DO NOT take it on long towing adventures.....the dang thing is so heavy my rhino wont pull it even in 4-wheel drive ,diff locked and in low range even with the gas pedal on the floor......and we took it to bryants cove on a ride and while going up monteagle mtn.....our old 87 chevy silverado ate 3 tanks of gas ..........but i have a 7x10 we made also and we fit a rzr-s on it .....7x10 or 6x10 is prolly best

bush wrote:

rottenrhino wrote:

Man all uhaul has is 5x9. do you guys think that will be alright? im pulling with a 2009 2500hd

a 5x9 should haul it just make sure you have good tongue weight. you may need to back it on just depends on the axle location. i haul mine on a 5x10 but i have to use ratchet straps to pull the wheels together. hook the strap to each a-arm and pull it tight. helps to lift up as you pull it tight.

That looks like the cheapest way to get a few more inches of lift I have ever seen!
note to self ...get ratchet straps

ChrisC wrote:

I had mine made a tad wider. its right at 6 1/2 x 10.
it works perfect for my S.....


Bush that seems like a lot of work just to load your S.
if you lived closer to me. i would widen that trailer a bit for you....

Chris....

not much work at all. i can put the straps on in a few mins.beats buying a new trailer. plus i have a 16ft utility trailer and use the cattle trailer also. just easier to put the straps on and use the small trailer than it is to use the big trailers.

bush wrote:

ChrisC wrote:

I had mine made a tad wider. its right at 6 1/2 x 10.
it works perfect for my S.....


Bush that seems like a lot of work just to load your S.
if you lived closer to me. i would widen that trailer a bit for you....

Chris....

not much work at all. i can put the straps on in a few mins.beats buying a new trailer. plus i have a 16ft utility trailer and use the gattle trailer also. just easier to put the straps on and use the small trailer than it is to use the big trailers.

Hay Bush what the Hell does gattle taste like...
is that a new form of beef yall have...... ........

thanks for everyone's input ! i ended up finding a 6x12 and it was a smooth drive !!!