What have you done to your SidexSide this week?

Thats always a good sound to hear!!

MuddyBuddy wrote:

Thats always a good sound to hear!!

When you havent ridden in almost a year (mid March was my last time out) its a very good sound to hear!!

Got the rear end put together, ran the engine long enough to bleed the air out of the cooling system. Gotta top off all the fluids, and I might actually put in the brake and gas pedal assembly and steering column and drive it around tonight.

Craig_C wrote:

Got the rear end put together, ran the engine long enough to bleed the air out of the cooling system. Gotta top off all the fluids, and I might actually put in the brake and gas pedal assembly and steering column and drive it around tonight.

I've heard several different opinions, I here tha t the RZR uses 4 different fluids....engine oil, front diff specific, and rear diff and tranny specific, now I heard you can use the same fluid in the tranny and rear diff, but front diff has to have a special thinner fluid, is this true?

You NEED to run Polaris LT Fluid in the front diff. The Rear diff uses a 75/140 Syn. The transmission and transer use the same fluid (I use lucas syn. ATF) Then the engine oil.

You can use other oils in everything except for the front diff, there you need to use the Polaris LT. The good side is that one quart bottle will fill the front diff a few times!

I dont know if people are using the same fluid in the rear diff as the trans/transfer...I wouldnt.

Yup

Stakk wrote:

Craig_C wrote:

Got the rear end put together, ran the engine long enough to bleed the air out of the cooling system. Gotta top off all the fluids, and I might actually put in the brake and gas pedal assembly and steering column and drive it around tonight.

I've heard several different opinions, I here tha t the RZR uses 4 different fluids....engine oil, front diff specific, and rear diff and tranny specific, now I heard you can use the same fluid in the tranny and rear diff, but front diff has to have a special thinner fluid, is this true?

Got a new chain saw, for the trails, at the Louisville Boat & RV show last weekend. It comes in a 12" or 14". I got the 14".

sweet good to be prepared gimpy.

Hey Gimpy, what is the model number on that saw? I don't like carrying around my Husqvarna 28" work saw bar in the back of the Rhino.

That looks like a can opener beside the one i pack all joking aside gimpy i no people that never pacs 1 sooner or later you will need 1

washed all that dam mud off

mason wrote:

washed all that dam mud off

Will be cleaning the S tomorrow

AIRBORNE wrote:

mason wrote:

washed all that dam mud off

Will be cleaning the S tomorrow

lol hey chris you cleaned yours before you left!

In the process of replacing all the a arm bushings and wheel bearings before spring riding season. Maybe get to try out these axle snapping tires in some mud.

I've been looking at the sthil saw with 16" bar for taking on the trails. its only 179.00

Smith700 wrote:

Hey Gimpy, what is the model number on that saw? I don't like carrying around my Husqvarna 28" work saw bar in the back of the Rhino.

That model is the CS-330MX4. They also come in Orange.
Pam has been wanting a small one for the property.

I have two 18" Stihl saws. They are way to big to carry on the RZRS.

I'm tired of working on mine, but it will be worth it when I am done.

Sporto wrote:

I'm tired of working on mine, but it will be worth it when I am done.

are we equipping a sporto package my friend?

You guessed it my Buddy that's Muddy!

Its starting to look alot like a RZR again!! I rode it up and down the street some, fought an air pocket in the cooling system, and had an issue with the throttle cable sticking (my fault, had it ran wrong) Did some testing with the Dynatek, according to my redneck speed runs and butt dyno, looks like I have knocked about 1/2 second off my 0-40 times.

Looks like you have almost got it together

Its all just plastics now...rockers, bed and rear fenders. Gonna wait till I take it to the dyno before putting all that on

Ordered a new right rear fender and 2 new tail lights looking at rear bumpers now trying to find a good one

MuddyBuddy wrote:

Ordered a new right rear fender and 2 new tail lights looking at rear bumpers now trying to find a good one

New tail lights..........ya think???

Haha were either of them working on that last run back to camp?