kenda bear claw

Thanks I was going 9 and 11.The website is KG motorcycles tires.They don't look anything like the old HTR.Look like bighorns

Here's the Link to that: http://kgmotorcycletires.com/kenda_bearclaw_htr.htm

They are the same as they always have been. (HTRs) Kenda does have a new Bearclaw EVO, but the sizes are limited and the tread-depths are not that impressive.

Here's the bearclaw evo link and yes the tread depths are not very impressive: http://kgmotorcycletires.com/kenda_bearclaw_evo.htm

I have 27" Bearclaw HTRs. Both of my back tires have leaked since new. It takes a few days but slowly but surely I will be sitting on flats. No holes in the tires that I have found but I am sure it's a slow leak around the bead(s). My buddy William had the same problem and the same tire. I like the tire though. If they made it in a 28" I would probably buy another set.

they do make them in 28's Captain. check mudthrowers website

Chris if you have beadlocks. They hate beadlocks. Mine leaked like crap too until I went with a non-beadlock wheel. they never leaked again. And they do make a 28 in a 14-inch only.

I keep hearing bad reports on beadlocks

Not that beadlocks are a bad thing wb. Some tires just plain don't work well with them. I wouldn't say it's totally a wheel problem.

yeah I know but I have read about these problems on several forums. Someone needs to get a list up of what tires works with beadlocks and don't work well with beadlocks. It would be helpful to know.

I have Black Water Evolutions with head locks. 9 psi still in them since last fall. 8 play side walls won't go all the way flat either.

Same setup as Gimpy here. STI HD beadlocks with 28x10x12 ITP Blackwater Evolutions. No leak down problems at all.