Wasn't a good idea!

My prediction...........Martys looking for some aluiminum plate as we speak................Oh and you don't have to weld on tabs or drill holes in your cage. 1-1/2 emt (conduit)straps work fine.........

ridepate wrote:

Now Marty, loose the "Bob-The-Builder top" as Robbie used to put it. An S/E top would suit me fine............

Jimbo, thanks for my "bob the builder top".

Looks sweet
Let's geter muddy next week!!

nocerisdave wrote:

ridepate wrote:

Now Marty, loose the "Bob-The-Builder top" as Robbie used to put it. An S/E top would suit me fine............

Jimbo, thanks for my "bob the builder top".

Dave,
Yours is not a "B the B" top, it's a sport-se top...................Look at the difference.

Ok, Ok enough about the top, sorry to hi-jack Martys thread. I'm considering the fiber-kit myself, I'll see it next week.

I was JKin ya. I love that top.

Marty one of the guys at Wilburns had these with the bed delete...with lots of sponcer type vinyls on the white. It looked bad arse. I like the clean look even better. Might look good with a touch of black similar to pates hood with the red on the black. IMO you cant get any cleaner a look than white with a touch of black.




Damn that thing is annoying....last post for that nanner.

sorry dave i cant quite tell what your trying to say there with the nanner???

ridepate wrote:

My prediction...........Martys looking for some aluiminum plate as we speak................Oh and you don't have to weld on tabs or drill holes in your cage. 1-1/2 emt (conduit)straps work fine.........

No holes Drilled in my cage slick.....
And claps will work fine , if your satisfied with that..

ChrisC wrote:

ridepate wrote:

My prediction...........Martys looking for some aluiminum plate as we speak................Oh and you don't have to weld on tabs or drill holes in your cage. 1-1/2 emt (conduit)straps work fine.........

No holes Drilled in my cage slick.....
And claps will work fine , if your satisfied with that..

No reference to yours man, I knew that....... I've just seen tops attached with screws to the tubing, to me, from a safety standpoint, no a good idea.

Ok.....
I agree , I would not bolt for drill into the tubeing.....

Nice job Yank...... I think the white looks swwwwweeeeeeeettttttttt!!!

shawnley1222 wrote:

sorry dave i cant quite tell what your trying to say there with the nanner???

thats a banana holding that sign.....hence the nanner.

I have a feeling that was sarcastic...


I propose a new idea - lets use italics if you are making a comment with a sarcastic tone....


like this:


Boy, Yanks ride sure is stock

Finally done. Turned out to be a hell of a job. Not unlike anything else i've done to the Rhino.

Awesome man!!!!!

SWEET !!!

Looks awsome Marty....... ...............
Now she is ready to hit the woods and get some
Dirt on her.......


Chris....... :D

Me like, Me like very much........

I want to rub up against Marty in the woods
and see if that white can take it......

Chris.....


I never thought about it. but i bet them being fiberglass
them guys that race must go though alot of body parts.
cause you know when thay roll or hit. it must crack.....

ChrisC wrote:

I want to rub up against Marty in the woods...

Ewwwww... I think I hear banjos warming up....

DirtDawber wrote:

ChrisC wrote:

I want to rub up against Marty in the woods...

Ewwwww... I think I hear banjos warming up....

:draw:

For some reson , I knew that did not come out right..... :(lmao:

I ment rub on him with the Rhino's , yall dam well knew
what i ment......

Chris..

rubbin's racing though I think target practice may come later....as in you may get shot

looks good yank....

now update the sig pic and avatar stat!

wvyankee2 wrote:

Wife says it looks better now. Just a little more odds and ends and it will be done.

Looks Awesome! :afro:

Hey Yank can you post a straight on view? To me thats the view they look best in....

Did you buy a kit to replace the POS stock plastic securing things? If so where did you get em?