My RZR S thread.

They are sweet. They should keep 90% of the mud off you.

Tonight greased the rear hub bushings, they had NO grease at all, maybe a little oil from the factory, but no grease. About a 30 min job, squeaks and creaks gone. I can see from the wear at only 73 miles, if you let these go you will pay later.............The Cadiumin plating on the metel sleaves were already showing wear. I'm gonna check the front tomorrow night.

ridepate wrote:

Tonight greased the rear hub bushings, they had NO grease at all, maybe a little oil from the factory, but no grease. About a 30 min job, squeaks and creaks gone. I can see from the wear at only 73 miles, if you let these go you will pay later.............The Cadiumin plating on the metel sleaves were already showing wear. I'm gonna check the front tomorrow night.

There are none on the front.

I know ball-joints on the front. I was gonna pull the wheels and inspect.

Not to be a big dumbass, but what bushings are talking about?

S wrote:

Not to be a big dumbass, but what bushings are talking about?

Outer, closest to the wheel, upper and lower a-arm bushings. Right where the rear discs are..

The bearing carrier bushings?
I know about the ones that connect the arms to the frame.

Hub-Bushings, Carrier bushings, axle-housing bushings. 9 , 10 top, 14/15/19 bottom.

OK thanks, that is what thought. Did you have completely take out the bushing to grease?

S wrote:

OK thanks, that is what thought. Did you have completely take out the bushing to grease?

Just the sleaves. I left the plastic installed.

Got 1-1/2 doors mounted tonight. Quality is great, fit is decent. You have to really watch-out for a few things. The instructions are almost worthless.
I tired, I'm going to bed............

Looks good!

I want to check em out in person. I like them..........torn between these and the Factory UTV doors.

Good Job Pate....

So , you got to paint them or are thay alumunum color.
looked different color than the body.

you did by the graphics right?

MAN !!! Those are gonna KICK ASS when you get 'em done !!!

Chris,
The graphics are comming. The set he had a crease in them and he did not want to send them, so thay have to come from Cali. I should get them next week. Rode today with them, no rattles, no noise at all and you can still look out and see the front wheel............makes the machine seem bigger inside with the elbow kick -out.

ridepate wrote:

Chris,
The graphics are comming. The set he had a crease in them and he did not want to send them, so thay have to come from Cali. I should get them next week. Rode today with them, no rattles, no noise at all and you can still look out and see the front wheel............makes the machine seem bigger inside with the elbow kick -out.

Be sure to post a pic of the finished product
when your done....

lookin good pate!

I have heard good things on those doors. Hope you enjoy them. I would like to get a set, but it may be awhile.

Lookin forward to seeing the finished doors Jimbo....... going to be one AWESOME looking machine

Tonight......Sway-Bar gone..........................FLEXY and SEXY...........(pos made too much noise anyway)............

ridepate wrote:

Tonight......Sway-Bar gone..........................FLEXY and SEXY...........(pos made too much noise anyway)............

Yeah, I would try this out. No one that I know has tried this. I know it was better off the rhino. But then the Rhino is a much different machine then the RZR. I would like to hear a report Jimbo.

Some guys over at RZR.net tried it without the swaybar
on the rear and did not like it....

ChrisC wrote:

Some guys over at RZR.net tried it without the swaybar
on the rear and did not like it....

I'm not "some-guys"...........................

ridepate wrote:

ChrisC wrote:

Some guys over at RZR.net tried it without the swaybar
on the rear and did not like it....

I'm not "some-guys"...........................

Amen.......

The noise you heard was the bolts on the frame
that holds it on. most need to be tightened from the factory.

Let us know if you like it pate....