Windshield

I have a Jstrong windshield its got scratched up by tree branches and has a bad glare with sun hits it anyboby know how to fixes clean it? so don't have to get new one

Don't know if it would work or not but might.be worth trying out a headlights lens restoration kit. I have a turtle wax kit.and it came with 4 different rubbing pads from fine to finest and rubbing solution. The digital dash on the foreman I had got dried out and scratched pretty good and I used the kit on it, didn't take out the deep scratches but took out the fine ones so I could see thru it again. I read somewhere, maybe on this forum, where someone was using a polycarbonate spray every time they cleaned and it would help keep the scratches off.

I would try a small area with the headlights kit to see if it works.

Try this with a small buffing pad on a Dremmel.

http://www.amazon.com/dp/B0000WUC7E/ref=asc_df_B0000WUC7E1489623?smid=A1Z0LSQOD17H0Y&tag=shopzilla_mp_1043-20&linkCode=asn&creative=395129&creativeASIN=B0000WUC7E

Get a piece of LEXAN that has MR10 coating.. Its what they use on race cars.. Some companies like EMP use MR10 Lexan.. Most of them don't though.. You can buy a piece of MR10 Lexan on Ebay for a decent price. I bought a whole sheet from a local plastic shop for around 250ish.

Where did you get it 8ball.

Marty, i use the same kit works great, but never used a Dremmel, thanks

ok thanks guys

8ball_99 wrote:

Get a piece of LEXAN that has MR10 coating.. Its what they use on race cars.. Some companies like EMP use MR10 Lexan.. Most of them don't though.. You can buy a piece of MR10 Lexan on Ebay for a decent price. I bought a whole sheet from a local plastic shop for around 250ish.

I've got a EMP half made of MR10, It does hold up a little better than acrylic, but it still scratches pretty easy. I'm gonna have to buy a new one this year. I did use some Per-Fect-It DuPont compound on a buffer, and it cleaned up a little, but the glare factors still there...

Hey 8ball could you tell me where you got the MR10??

EPI plastics in Huntsville can order it if you want a full sheet. Or you can get cut pieces off of ebay.

Thanks.