| | RZR 900 universal/ U-Joints |  |
|
+6RedNeckRanger ktpguy CatMostFeared aweisgarber jhoncho4x4 Big-R 10 posters |
|
| Author | Message |
|---|
chipper
SSXSRider Member
Number of posts : 1035
Registration date : 2010-12-30
Age : 53
Location : Danville
| | Subject: Re: RZR 900 universal/ U-Joints Thu Sep 12, 2013 5:28 pm | |
| - Big-R wrote:
- rzr4 rider wrote:
- 1501 is 1.485 and the 338 is 1.5 inches wide. Which is a difference of .015. So measure with a mic the inside of the yoke and get the correct one. Both are greasable.
I will. The 1501 number came from Chipper.........  1501 is what is in mine now as well as the old 800. It is greasable. | |
|
| | |
Big-R
SSXSRider Staff
Number of posts : 16074
Registration date : 2008-02-26
Age : 51
Location : Louisville,Ky
| | Subject: Re: RZR 900 universal/ U-Joints Thu Sep 12, 2013 8:36 pm | |
| - chipper wrote:
- Big-R wrote:
- rzr4 rider wrote:
- 1501 is 1.485 and the 338 is 1.5 inches wide. Which is a difference of .015. So measure with a mic the inside of the yoke and get the correct one. Both are greasable.
I will. The 1501 number came from Chipper......... 1501 is what is in mine now as well as the old 800. It is greasable. How did you find that part number?? | |
|
| | |
RedNeckRanger
SSXSRider Member
Number of posts : 946
Registration date : 2009-06-03
Location : CHATTANOOGA
| | Subject: Re: RZR 900 universal/ U-Joints Sun Sep 15, 2013 6:45 pm | |
| installed the 338 s in mine today.ran out of time so I will have to trim the plastic so the new carrier bearing will fit and forgot to pick up some longer bolts for it.should have it back together tomarrow.im happy I will be able to grease my u joints and carrier from now on | |
|
| | |
RedNeckRanger
SSXSRider Member
Number of posts : 946
Registration date : 2009-06-03
Location : CHATTANOOGA
| | Subject: Re: RZR 900 universal/ U-Joints Tue Sep 17, 2013 8:51 pm | |
| mine went back together great tonight .love all these grease fitting ! | |
|
| | |
GCFD112
Number of posts : 152
Registration date : 2011-11-02
Age : 36
Location : Calhoun,GA
| | Subject: Re: RZR 900 universal/ U-Joints Sun Dec 28, 2014 7:59 pm | |
| Which u joints did u end up using big r and how do you install them? | |
|
| | |
Big-R
SSXSRider Staff
Number of posts : 16074
Registration date : 2008-02-26
Age : 51
Location : Louisville,Ky
| | Subject: Re: RZR 900 universal/ U-Joints Sun Dec 28, 2014 8:35 pm | |
| - GCFD112 wrote:
- Which u joints did u end up using big r and how do you install them?
It was a while ago but I do believe I used the 338. I used a vice and socket to press them out. It worked fine. | |
|
| | |
GCFD112
Number of posts : 152
Registration date : 2011-11-02
Age : 36
Location : Calhoun,GA
| | Subject: Re: RZR 900 universal/ U-Joints Sun Dec 28, 2014 10:05 pm | |
| Good deal. Im about to do all of mine and the carrier bearing. | |
|
| | |
Sponsored content
| | Subject: Re: RZR 900 universal/ U-Joints | |
| |
|
| | |
| | RZR 900 universal/ U-Joints | |
|
