My RZR Thread!!

Nice work guys!

Big Brown Truck stopped by today.....





And the bumper looks much better with some paint....

Nice!!!! I need a power commander to try and richen my motor up.

that's "for racing vehicle use only"

Big Ed wrote:

that's "for racing vehicle use only"

Yeah I guess they didn't know that I was not racing...........

Are you having these painted black?

smith700 wrote:

Are you having these painted black?

No. They will match my A arm guards....

Oh, alright.
It looks like it's missing something????

Well I did another mod to the RZR. I moved the Voltage Regulator to the front of the machine. The 08 RZR's V/R was under the seat. This does not allow enough air flow so in 09 models and latter the V/R was moved up front by the radiator.

The first thing you need to buy is a relocation harness. It is about 80 bucks. Also buy a 09 bracket for the voltage regulator.

This is a well made harness.


You will have to remove the front black plastic of the RZR.



Now mark your holes for the voltage reg bracket.


It is time to drill. You need to put a stop on your drill bit. Because you will for sure drill a hole in your radiator if you don't. I used a pin and cut it to fit.





Also, I would put something in front of the radiator in case you slip. i had some 3/4 plywood that worked for me.


Bolt the V/R on the bracket first then install the bracket on the machine. There is not a lot of room to work in between the radiator and the V/R. Install the harness and you are good to go......

That's a neat trick with the pen and drill bit! I may use that sometime.

Nice little addition to the RZR Ronnie!

Cool! No pun intended!

Goose wrote:

Cool! No pun intended!

LOOKS GOOD !!

I need new rear spindles......

Damn bro.....that sucks.

AIRBORNE wrote:

Damn bro.....that sucks.

It is not that big of a deal. 60 to 80 bucks a side. I have new ones on the front already.

So is the bearing carrier bad?

nocerisdave wrote:

So is the bearing carrier bad?

Yeah. I think they call it the wheel carrier. I thought I need new bushings..... That did not work.

Big-R wrote:

AIRBORNE wrote:

Damn bro.....that sucks.

It is not that big of a deal. 60 to 80 bucks a side. I have new ones on the front already.

R do they come with bearings? if so thats the way to go if you need new bearings

bush wrote:

Big-R wrote:

AIRBORNE wrote:

Damn bro.....that sucks.

It is not that big of a deal. 60 to 80 bucks a side. I have new ones on the front already.

R do they come with bearings? if so thats the way to go if you need new bearings

I don't think they do and I really don't need bearing as of yet. The bearings have about 800 miles on them and they are holding up great. But I am sure it will not be long.

Now the spindles have 4600 miles on them. They are done!!!!!! Not bad though. If they could make the bushings last that long we would be in great shape.

Big-R wrote:

nocerisdave wrote:

So is the bearing carrier bad?

Yeah. I think they call it the wheel carrier. I thought I need new bushings..... That did not work.

So whats worn out?

nocerisdave wrote:

Big-R wrote:

nocerisdave wrote:

So is the bearing carrier bad?

Yeah. I think they call it the wheel carrier. I thought I need new bushings..... That did not work.

So whats worn out?

The holes that the bushings fit into. The new bushings are loose when I slide them in.

I see.

Thay lasted 4600 miles, thats not to bad......