Bracket-type 2" lift kits

Anyone tried one of these cheap lift kits?

Aluminum one:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=160399352206&viewitem=&_trkparms=clkid%3D7748097330635566108

Steel one:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=330395683253&viewitem=&_trkparms=clkid%3D7748200183557610518

I wouldn't mind more ground clearance, but I've heard of too many problems with the 3" lift kits to consider going that much higher with everything else stock.

TIA...

Have you measured yours front and rear? Most Rhinos I have found set 2 inches lower in the front. I am working with RDC tring to get a leveling kit that adds 1.5-2 inches in the front and leave the rear alone. The RDC is very heavy duty and at 1.5+ inches it should not but the axles in to much of a bind.

I would not recommend a lift in the rear especially if you removed the sway bar. Reason being I tried a rear kit that yielded 1 inch more ground clearance than factory and with that kit and the stock shocks at full extension the axle would hit the frame on the right hand side of the rhino.