xp 900 noise in awd

I have a 2013 rzr xp 900 2 seater and its got around 1500 miles and this past weekend while riding I went climb a hill, I put it in awd and low and climbed the hill. The whole way up the hill it made a growling sound. I have never noticed this sound before. From that point on it has been doing that everytime I put it in awd and gas on it pretty good. It goes in and out of awd fine and does not do it in 2wd. Ive read and read posts and it seems like a problem a lot of people have had but I cant find any answers. Has anbody found a fix for this?

Most make some noise/vibration in 4wd but if you just now hearing this you might want to check the carrier bearing on the drive shaft.

The carrier bearing started making a noise here while back and I greased it and it stopped but i greased it and its still making the noise. Im gonna replace all u joints and the carrier bearing and see what happens.

that should fix it...there is a thread on here or two about the carrier bearing and u joints ,
get a pillow block bearing 30mm that's greasable and u can get greasable u joints at advance auto..

Ive read the pillow block woll only work on the 2011s

GCFD112 wrote:

Ive read the pillow block woll only work on the 2011s

The 2012-14's can use a carrier bearing for a mid 90's Toyota Tacoma.They are about $40 with a 1 yr warranty from Oreillys.I think the one from Polaris is about $150.

The toyota bearing I found is $75. Polaris one is $40.

Wow,they must have really lowered the price since I checked.Thanks